Carry out Moisture Assessment Test to Avoid Costly Flooring Problems

When it comes to early completion of flooring, the main hurdle you have to come across is the long drying period of floor screeds. Owing to the difficulty to predict the drying time accurately, it is always essential to conduct a moisture assessment test before the application of any final floor finish. Drying time for a traditional sand and cement screed at 75mm is 110 days, while the drying time for a liquid one at 55mm is only 70 days. But irrespective of the materials, liquid or traditional cement and sand, conducting moisture testing prior the installation of final floor finish is very important. There are several methods such as Concrete Moisture Test (CM Test), Calcium Carbide Test, Air Hygrometer Test and many others which are used to measure the moisture level of screeds. If you are looking for a simple device to carry out liquid screed moisture testing quickly, Hydro Testing meter is the most trusted and advanced one.

All about Hydro testing 

With the demand of completing flooring projects as soon as possible, the flooring experts end up cutting corners. In order to attain accurate results, proper moisture testing procedures should be done to avoid costly problems later. Using Hydro testing meter you can assess the moisture content of floor screeds. It assesses the moisture content of the screed by measuring its electrical impedance. This tiny but effective moisture testing device can be stuck to any kind of floor giving you floor humidity readings each and every minute of the day. Within a moment, this device can tell you if your floor is ready to take any covering or not. No matter whether you have opted for traditional screeds or flowing screeds, don't forget to hire a screeding company that is experienced and conduct moisture level testing before the final covering. If you take the service of experienced professionals they will take full care that the process is completed with full perfection taking all important requirements under consideration.

The drying time of liquid screeds are less compared to the traditional cement and sand screeds. Unlike cement based screeds, the liquid ones can be forced dried after 7 days of installation. In order to ensure the quality, durability and good finishing of your floor coverings, you must ensure that the screed is completely dried up and ready for use.